- House Brand
- Battery
- Busduct System
- Cable
- Cable Joint & Termination
- Cable Support System
- Capacitor Bank
- Emergency Lighting
- Earthing Product
- Explosion Proof Equipment
- ESE Lightning Arrestor
- Enclosure Box
- Fans
- Fuse
- Festival Decorations
- GI Accessories
- BENA JAYA
- LANRIC
- NMC
- PUM
- OTHERS
- Aluminium Line Tape
- Brass HD Line Tape
- Brass Earth Tag
- Bar Saddle
- Beam Clamp
- Copper Earth Link
- Copper Clamp
- Copper Bush
- Copper Rod Socket
- Copper Bar Saddle (Copper Or Alluminium)
- Clip
- DC Tape Clip
- Flexible Adaptor
- Fan Hook
- GI Flexible Adaptor
- GI Half Saddle
- GI Socket
- Lid Cover
- Lightning Arrester C/w Base
- Papaya Bracket
- Plate Type Test Bond - Copper Or Aluminium
- Screw
- Trunking Bracket
- Test Bond Square
- Lamp Pole
- Lighting
- Meters and Relay
- DELAB
- Combined Over Current & Earth Fault Relay
- Digital Multimeter
- Digital Power Factor Regulator
- Digital Time Switch
- Earth Leakage Relay
- Earth Fault Relay
- External Plug-In Module
- Earth Fault Indicator
- Motor Protection Relay
- Over Current Relay
- Power Quality Network Analyzer
- Voltage Monitoring Relay
- Zero Phase Current Transformer
- MIKRO
- MPI
- DELAB
- PVC Wiring Product
- Precast Concrete
- Switchgear
- Switches
- Smart Home System
- Terminal
- Transformer
- Underground Pipe
- Others
BESTLITE ELECTRICAL
SDN BHD
1, Jalan 4/92B, Taman Kobena Cheras, 56100 Kuala Lumpur, Malaysia.
+603-9286 3900
+60172231366Sales Person
+6017-208 7211 (Muzafar)
ACTIVE 4D® Early Streamer Emission Lightning Rod with Integrated Storm Detector
| Previous | 3 / 5 | Next |
Press Here to download catalog 👇
https://drive.google.com/file/d/1yMHCKiFOycc5bIo9x3s9nupduxlZIaLt/view
Lightning rod : the principle of the ESE Active 4D® is not only to initiate the upward leader, but to provide the energy needed to ensure its propagation until the junction with the downward leader.
https://drive.google.com/file/d/1yMHCKiFOycc5bIo9x3s9nupduxlZIaLt/view
Lightning rod : the principle of the ESE Active 4D® is not only to initiate the upward leader, but to provide the energy needed to ensure its propagation until the junction with the downward leader.
The Active 4D® system is equivalent to the ESE Active 2D® lightning conductor, featuring two devices: “Impulse” and “Power” devices.The Active 4D® operating system can be tested at anytime, either by a remote tester or by computer linked to the Activ’Control® housing (via local network), through the LMS software (Lightning Monitoring System).
The Active 4D® offers two models following to the excitation device speed: 30 and 60 µs. The system was tested in compliance with the September 2011 NF C 17-102 standard, in an independent laboratory accredited COFRAC.
The Active 4D® offers two models following to the excitation device speed: 30 and 60 µs. The system was tested in compliance with the September 2011 NF C 17-102 standard, in an independent laboratory accredited COFRAC.
Integrated impact counter : the Active 4D® allows to record lightning strikes autonomously. The innovation comes from a built-in lightning counter in the Active 4D® system. This lightning strike counter allows to timestamp and stores the various impact information captured by the Active 4D® (number of impacts, day / time of each impact, value, form and energy of the Lightning electric current).
This data is then transferred by radio link to the Activ’Control®. The operator, through the LMS software, has access to these various data and visualizes the curves of the lightning current.
This device complies with the decree of 19th of July 2011 and with NF EN 62561-6 standard.
Integrated storm detector : The Active 4D® allows in predicting a storm. The detection works through 1 integrated sensor that measure with precision the electrostatic field value.
Once the recorded value indicate an imminent risk of lightning, the Active 4D® with its dry contact Activ’Control® housing, takes the initiative to send audio alerts (siren, …), and / or visual alerts (flashing light …).
The LMS (Lightning Monitoring System) software, permanently connected with the Activ’Control® (and thus the Active 4D®) allows visualizing the evolution of risk.
The great innovation of the system (patented) was to include prevention with lightning protection.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
This data is then transferred by radio link to the Activ’Control®. The operator, through the LMS software, has access to these various data and visualizes the curves of the lightning current.
This device complies with the decree of 19th of July 2011 and with NF EN 62561-6 standard.
Integrated storm detector : The Active 4D® allows in predicting a storm. The detection works through 1 integrated sensor that measure with precision the electrostatic field value.
Once the recorded value indicate an imminent risk of lightning, the Active 4D® with its dry contact Activ’Control® housing, takes the initiative to send audio alerts (siren, …), and / or visual alerts (flashing light …).
The LMS (Lightning Monitoring System) software, permanently connected with the Activ’Control® (and thus the Active 4D®) allows visualizing the evolution of risk.
The great innovation of the system (patented) was to include prevention with lightning protection.